Water Remover: Eject Water

Water Remover is a speaker cleaner that helps you eject water from your phone the moment it gets wet. It plays low tones through your phone speaker while the phone vibrates, which can help push water out of the speaker grille after rain, a splash or a spill.

Water eject in one tap

• Tap Eject Water to start a sound wave generated right on your phone

• Quick mode plays a fixed tone for 5 seconds; Deep mode sweeps through low frequencies for 15 seconds

• The phone vibrates for the whole run, and you can stop at any time

• The screen shows the live frequency in Hz and the seconds left

• Long-press the app icon and choose Eject Water to start straight away

Tone presets for each part of your phone

Pick Speaker, Microphone, Charging Port or Buttons. Each target is a tone-and-vibration preset with its own frequency range, from 80 Hz to 1,000 Hz, played through the phone speaker together with vibration. Every tone is audible; nothing is ultrasonic. After a run, the app suggests a next step: play audio to hear the difference, record a voice memo, plug in only after the port looks dry, or press each button.

How to remove water from your phone speaker

1. Disconnect headphones and Bluetooth speakers, because the tone plays through whatever audio output is active

2. Turn your media volume up; the app asks for at least 70%

3. Choose a target and Quick or Deep mode, then tap Eject Water

4. Play some audio and listen. If the sound is still muffled, run Deep mode

Speaker checks with Pro Care

A Pro Care subscription adds guided listening checks to the speaker cleaner:

• Speaker tones from 250 Hz to 8,000 Hz, so you can listen and compare

• A microphone level check that records a few seconds of room sound on your phone; the recording is not saved

• A tone sweep from 300 Hz to 4,000 Hz

• A left and right check for phones with stereo speakers

• A history of your recent checks, stored on your phone

Who it is for

Anyone with water in the speaker after a rainy walk, a day at the beach or pool, a workout or a splash in the kitchen. If water in the speaker leaves your phone sounding quiet or muffled, this speaker cleaner gives you a quick first step to try before you look at repair options. Everything runs on your phone, with no account and no ads.

Plans

Water Remover includes your first Quick speaker run. After that you can choose:

• Emergency Pass: unlimited water removal for 72 hours on this device, as a one-time purchase

• Unlimited water removal: a one-time unlock with no subscription

• Pro Care: every water removal mode plus the speaker checks and history, as a weekly or yearly subscription. It renews automatically unless you cancel in Google Play at least 24 hours before renewal.

Important

Water Remover is designed for everyday device care. It can help with small amounts of water around speaker grilles, but it cannot repair physical water damage or dry the inside of a phone. Results may vary depending on the amount of liquid, device condition, case, volume level and speaker hardware, and the app is not a guarantee against water damage. If your phone shows liquid warnings, will not turn on, has visible corrosion, or audio problems continue after cleaning, contact device support or a qualified repair provider. Don't charge your phone right after water exposure, and avoid excessive heat while drying. Please use responsibly and protect your hearing.