About SensorBox: Metal Detector Kit
Metal detector, dB meter, bubble level, compass, lux & sensor test. Offline.
Turn the sensors already inside your phone into instruments you can read. Thirteen tools in one app: metal detector, sound level meter (dB), bubble level, compass, light meter, vibration meter and seismograph, barometer and altimeter, and an on-screen ruler.
Zero network calls. No account, no server. Every reading stays on your device.
■ USE IT WHEN
· Before drilling, to find metal or pipework behind the wall
· Hanging a frame or a shelf and want it level to 0.1°
· Logging in dB how loud the neighbours upstairs really get
· Checking the lamp on your desk is bright enough to read by
· The screen won't turn off on a call and you suspect the proximity sensor
· Checking a used phone really has a gyroscope and a barometer
· No tape measure and you need a centimetre reading now
■ DETECT
· Metal detector — learns the baseline of the magnetic field around you and shows the deviation in µT as metal nears. The beep speeds up as the reading climbs, like a real detector. Sensitivity 0.5x-4x, analog gauge and live waveform
· Vibration meter / seismograph — subtracts gravity from the accelerometer so you see pure vibration in mg. Estimates felt intensity (MMI) from peak acceleration, alarms above a threshold, and shows the frequency spectrum
· Sound level meter — converts the microphone level to dB. Min, average and peak, a reference table of everyday noise, and a calibration slider
■ MEASURE
· Light meter — lux with recommended levels (500 lx reading, 1000 lx detail work)
· Barometer and altimeter — altitude from the standard atmosphere, sea-level pressure correction, and a weather outlook from the pressure trend
· Height meter — aim at the base, then the top: trigonometry gives you the height of a tree or building
· Jump and throw meter — free-fall hang time converted to height, recent attempts side by side
■ ORIENT
· Bubble level — round spirit bubble plus pitch, roll and slope, with a saved correction for a phone that is not perfectly flat
· Protractor — half-dial reading 0° at vertical and 90° at horizontal. Hold, zero, slope percentage and complementary angle
· Compass — tilt-compensated heading that stays right when the phone is not flat, magnetic interference warning, direction marking
■ SCREEN AND DEVICE
· On-screen ruler — centimetres and inches. Calibrate once against a credit card (85.6 mm) and the scale becomes true to size
· Proximity sensor check — find out whether a case or a screen protector is covering the sensor that blanks the screen on calls
· Sensor explorer — every sensor in your phone with its vendor, range, resolution and power draw. Tap one to watch live values, or export the list as CSV
■ RECORDS AND EXTRAS
· A log per tool with best and average, exports as CSV
· 16 achievements — first reading, a 200 µT spike, breaking 90 dB, levelling to 0.1°
· Backup and restore as JSON — history survives a new phone
· Metric and imperial units, light and dark themes
■ WHAT MAKES IT DIFFERENT
· Fully offline. Measuring never touches the internet
· One permission: the microphone, for the sound meter. Decline it and the other twelve tools still work
· Audio is never recorded, stored or transmitted. The level is computed and the samples are thrown away
· Installs on phones that lack a sensor — only that one tool is marked unavailable
· Extras such as removing the banner or high-speed mode open for 24 hours after a short ad. If no ad is available, we open them anyway
■ PLEASE NOTE
SensorBox is a reference tool, not a calibrated instrument. The metal detector reads changes in the magnetic field, so it responds well to iron and nickel and weakly or not at all to aluminium, gold and copper. Seismograph readings approximate felt intensity and do not replace official monitoring. Sound levels depend on your microphone, so calibrate first. Tools that need a sensor your phone lacks are shown as unavailable.
Languages: English, 한국어, 日本語, 中文, Español, Português, Français, Deutsch, Русский, Bahasa Indonesia
What's new in the latest 1.0.0
• Metal detector, vibration meter, seismograph, sound meter, light meter, altimeter, height, jump, level, protractor, compass, ruler, sensor list
• Fully offline. Measuring never uses the internet
• One permission: the mic, for the sound meter. Twelve tools work without it
• Logs, CSV export, backup, 16 achievements
• 10 languages, light/dark, metric/imperial
A reference tool, not a calibrated instrument.
SensorBox: Metal Detector Kit APK Information
Old Versions of SensorBox: Metal Detector Kit
Super Fast and Safe Downloading via APKPure App
One-click to install XAPK/APK files on Android!






