Ch341a Mobile

CH341A Mobile turns your Android phone into a CH341A programmer. Connect a CH341A USB programmer with an OTG adapter and detect, read, erase, write and verify memory chips — no laptop needed.

SUPPORTED CHIPS

- 25-series SPI NOR flash — 577 models in the built-in catalogue (Winbond W25Q, Macronix MX25L, GigaDevice GD25Q, EON EN25 and more), found in routers, receivers, TVs and motherboards

- 24-series I²C EEPROM (24C00 to 24C2048, 24LC1025)

- 25/95-series SPI EEPROM and SPI F-RAM

- 93C Microwire EEPROM (93C46 to 93C86, x8 / x16)

KEY FEATURES

- Auto mode: read, erase, write and full verify in one tap

- Manual mode: every step on its own — read, erase, blank check, write, verify

- Verify you can trust: every write is read back from the chip and compared with your file; a failed check is never shown as success

- Live progress: step tracker, speed, elapsed time, time left and current address, with a safe Cancel

- Keeps working with the screen off or the app in the background, with a progress notification

- Chip information: JEDEC ID, SFDP, addressing, unique ID and status registers

- Built-in hex viewer: compare the original read, your file and the verified flash; HEX / ASCII search and jump to address

- Backup and restore: save the original chip and write it back later

- Opens BIN and Intel HEX files; files that do not fit the chip are refused, never cut or padded

- Safe, Balanced or Fast programming speed; SPI timing slows down by itself on an unstable connection

- 1.8 V chips are protected: writing stays blocked until you confirm a 1.8 V adapter is fitted

- One-tap error report to our team if an operation fails

PRIVATE AND OFFLINE

- No account needed

- Programming works fully offline

- Your firmware files, chip reads and backups stay on your phone

FREE WITH FAIR ADS

The app is free and shows a few ads: when it opens and after a successful programming run — never while a read, erase, write or verify is running. Watch one short video to use the app without ads for 30 minutes.

10 LANGUAGES

English, Roman Urdu, Arabic, Turkish, Persian, French, Indonesian, Russian, Spanish and Hindi — with dark and light themes.

REQUIREMENTS

- Android 8.0 or newer with USB host (OTG) support

- USB OTG adapter or cable

- CH341A USB programmer with a SOIC clip or socket adapter

- 1.8 V adapter for 1.8 V chips

IMPORTANT

Use CH341A Mobile only on devices you own or are allowed to service, with firmware you have the right to use. Writing the wrong file or interrupting a write can leave a device unable to start — always keep a backup of the original chip. Firmware files are not included.

CH341 is a product of Nanjing Qinheng Microelectronics (WCH). CH341A Mobile is an independent app and is not affiliated with WCH.

User guide: https://ch341a.khandishnetwork.net/guide.html

Support: support@khandishnetwork.net